JMD Infra Power

Attention:- This is recommenced that only qualified engineers/electricians should perform the installation. Before connecting the controller, in-comming voltage should be checked for in-range voltage rating of controller. Care should be taken that low and high voltage than the device rating would damage the controller. 

Connection:-
Compare voltage and current of the device. Assemble the apfc relay in capacitor switching panel with the two side clamps. Connect the apfc relay according to wiring diagram. It is strongly recommended the phase given to the relay should be same phase on which ct is installed. If the polarity of ct is reversed the display on screen is `r.ct` (interchange the ct connection)

Product Details:-
Display L.ct - Low or no Current
H/L LED Green - Under Compensation
H/L LED Red - Over Compensation
H/L LED Blank - Compensation in Range
SW LED Glow - Setting Keys Activated

Attention:- This is recommenced that only qualified engineers/electricians should perform the installation. Before connecting the device, in-comming voltage should be checked for in-range voltage rating of device. Care should be taken that low and high voltage than the device rating would damage the device. 

Connection:- Compare frequency, voltage and current of the device. Assemble the apfc relay in capacitor switching panel with the two side clamps. Connect the apfc relay according to wiring diagram. PEI_FFCN is free from CT polarity

Attention:- This is recommenced that only qualified engineers/electricians should perform the installation. Before connecting the controller, in-comming voltage should be checked for in-range voltage rating of controller. Care should be taken that low and high voltage than the device rating would damage the controller. 

Connection:-
Compare voltage and current of the device. Assemble the apfc relay in capacitor switching panel with the two side clamps. Connect the apfc relay according to wiring diagram. It is strongly recommended the phase given to the relay should be same phase on which ct is installed. If the polarity of ct is reversed the display on screen is `r.ct` (interchange the ct connection)

Power of TechnologyLoad Manager & Demand Controller ?? Suitable for 3 Phase 4 Wire LT Network. ?? Three line LED display. ?? Displays: Voltage and Current Of each phase.Load??management, also known as demand-side management (DSM), is the process of balancing the supply of electricity on the network with the electrical??load??by adjusting or controlling the??load??rather than the power station output.

Established in the year 2021 at, Harsh Vihar, Delhi, we “JMD Infra Power” are acknowledged organization and are Sole Proprietorship based firm, engaged as Wholesaler and Trader of Panel Meter  Switron Switch, DC Power Pack etc